Zaxe Knowledge Base Logo
Zaxe Knowledge Base Loader

How to Fix Warping



How to fix:

  1. 1. Apply glue to the print surface to prevent ensure perfect first layer adhesion.

  2. 2. Use a heated printbed to keep the bottom parts of your print warm through the printing process.

  3. 3. Disable the fans to keep the temperatures high to keep the print from cooling off too fast.

  4. 4. Use an enclosure or a heated chamber to keep the printing area warm and temperatures consistent if it is available to you.

  5. 5. Print with a brim so it helps the print resist the pulling effect caused by the possible warping.

Was this article helpful?