Zaxe Knowledge Base Logo
EN
Zaxe Knowledge Base Loader

How to Fix Clogged Nozzle

Troubleshooting

Clogged Nozzle

How to fix:

  1. 1. The most obvious solution would be to clean your nozzle thoroughly. Using a piece of cloth that is damp with alcohol would be a good start to cleaning the entrance of the nozzle.

  2. 2. Clean the inside with a nozzle cleaning needle while the printhead is still warm.

  3. 3. Use a cleaning filament to unclog the nozzle.

  4. 4. Try not to print with different types of filaments in different temperatures without first cleaning the nozzle.

  5. 5. If nothing else works, you can try the cold pull technique to clean your hot end thoroughly.

Was this article helpful?