Zaxe Knowledge Base Logo
Zaxe Knowledge Base Loader

Zaxe Z3 3D Yazıcınızla ile İlk Kalibrasyonunuz


Calibration is one of the hardest aspects of 3D printing to master. Even if you have been doing it for years, there is a chance that something will go wrong. Maybe the first layer won’t stick, the nozzle will scrape on the print bed or the layers will shift during printing.

As Zaxe, we developed our fully automatic calibration system to make the process easier for all of our users. But there are still a couple of settings you might want to adjust to make sure you get the best results you can.

Remember, not every single one of these steps has to be done whenever you use your Zaxe Z3 3D Printer. Maybe repeating the procedure will benefit you when you use your 3D printer for a long time without calibrating it or after you move your device from one room to another. But don't waste your time calibrating too frequently.

What is Calibration?

Calibration is the process of adjusting different aspects, settings, and axis of your 3D printing components in relation to their place from the extruder. When the calibration process is over, your print bed should be in the perfect place for your extruder to start printing with no problem.

If the terms we use sound unfamiliar to you, don’t worry as our user-friendly interface and the visuals we put on settings screens will be useful for you when you are trying to learn the concepts. Just follow the instructions we provide you and you should be completely fine.

Your First Perfect Calibration with Zaxe Z3

We will go step by step with this and basically hold your hand through the calibration process to make sure you get it right the first time. We will also explain each step so you understand your 3D printer better. The interface of Zaxe Z3 is fairly simple and most of the process is automated, so we doubt you will face a lot of problems even with the steps that are not automated.

Zaxe Z3 Screen - Filament Settings
Zaxe Z3 Printing Table
Zaxe Z3 Probe
Zaxe Z3 Calibration Lines
Zaxe Z3 Screen - Printing

Bu makale size yardımcı oldu mu?